BAYTECH Foshan Baytech Co., Ltd. · Foshan, Guangdong, China

Industrial chain supply
Chain supply for steel mills and foundries
fsbaytech.com

Chain supply for steel mills and foundries

Coil, plate, tube, sinter, casting and furnace lines. These are the positions we supply for — the five details below are all we need to quote yours.

What we supply — by where it runs

Chain	Duty
P650 Coiler transportation chain	Carries full coils from the mill under shock loading, continuous duty
P500 Hot rolled coil conveyor chain	Moves heavy coil between process stages under continuous load
P250F13 Wide and thick plate conveyor chain	Heavy plate through the rolling and finishing line, high point loads
Cold bed and shear conveyor chain	Hot-rolled plate across the cooling bed and on to the cutting station
P150 Steel pipe conveyor chain	Mill output line, carrying finished tube to downstream handling
Steel pipe pulling chain	Continuous tension, pulling tube through the drawing station
Cast iron machine chain (P860 / P305)	Pig iron casting line, carrying moulds at high temperature
Sintering and ingredients preparation chain	Abrasive fines and ore across the raw material preparation area
Pellet inclined conveyor chain	Feed material up the incline, abrasive continuous duty
Raw material pile reclaiming drive chain	Drive behind the reclaiming arm on stockyard handling equipment
P152 Dust removal scraper chain	Collected fines inside the enclosed extraction system
Forged and desulphurisation scraper chain	Abrasive, elevated-temperature material in hot metal treatment
Heat treatment furnace conveyor chain	Product through the heating cycle at sustained high temperature
Dummy bar chain for continuous casting	Withdraws the starter bar and strand on the caster under high pull load
LF155 Floor chain	Floor-mounted conveyor moving heavy product across the shop floor
Lifting chain for material handling	Vertical transport under high tension and repeated cyclic load
Sprockets	Cut to your bore and keyway, matched to the chain you are running

What we can point to

Ten conveyor chains delivered as one batch to a leading European steel producer — with the matching parts, not as loose spares.
Coil, plate, tube, sinter, pellet, dust and desulphurisation lines — the same plant rarely buys one chain type, and we quote across the set.
Position first, drawing second. If you tell us where the chain runs and what it carries, we can usually name the standard reference that fits.

Chain drive conveyor systems for steel mills and foundries

In a steel mill the chain is often the conveyor. Continuous casting, sinter and pellet lines, scraper reclaim, dust removal and coil handling all run on chain drive conveyor systems where the chain is the carrying element itself.

The families we build for this duty:

Heavy duty conveyor chain — for pallet, scrap and lump material at high temperature.
Continuous casting chain — running in the hot zone, where thermal expansion and thermal shock set the material grade.
Scraper chain — for dust removal, desulphurisation and raw material reclaim.
Coil handling chain — for hot rolled coil transfer in the finishing bay.
Lifting chain — for material handling inside the plant.

Mill duty is where our chain catalogue and our application experience matter more than a price list. Send the chain number and the drawing, or the conveyor layout, and we will work out the replacement and the material grade with you.

Standards

ISO / DIN / ANSI / JIS — standard series where one fits
Single, double and triple strand
Heavy conveyor chain made to mill drawing where none fits

Material & treatment

Alloy, carbon or stainless steel — the grade is fixed by the working temperature you give us
Surface treatment for wet and scaling zones
Plate thickness and attachments to drawing

Five details, and we can quote

The chain type — P650, LF155, P250F13 — or the part number stamped on the plates
Pitch, strand count and plate thickness
Where it runs — table, cooling bed, caster, sinter line or scale pit — and the working temperature
Annual quantity, and how often the line stops for chain
Your target price, if you have one

Any one of these is enough to start. In a mill the duty cycle tells us more than the drawing — a photograph of the chain in place, with the scale pattern on it, is usually the fastest route to a quote.

How we work

One contact, direct. No call centre, no ticket number.
Written specification first — dimensions and material confirmed before anything is quoted.
Sample before volume. Sections of chain can be sent for trial on your line.

Batch supply is normal. A full set for one line, or several lines at once.
We supply from China's chain cluster, not from a stock list. Anything not held can be made.
No catalogue dump. You get the item you asked about, priced.

Other industries Sawmills · Agricultural machinery · All industries

Send a photo or a part number

Email is the fastest way to reach me — the position on the line and a photo of the chain in place are usually enough for us to come back with a price and a lead time.

Ask for the PDF spec sheet — I'll send it over with a price and a lead time.

kathy.z@fsbaytech.com

Part numbers and trade names are mentioned for identification and reference only. Not affiliated with, or endorsed by, any original equipment manufacturer.